General Terms and Conditions of Purchase and Sale:
Issue 2 10/10/2017
Except only where expressly agreed otherwise by us in writing, every order and/or purchase shall be subject to these terms and conditions (hereinafter called "Conditions")
and by commencing work on any Order you will be deemed to have irrevocably accepted these Conditions to the exclusion of any other terms. These conditions shall be deemed to
supersede all prior representations, understandings, arrangements and agreements between the parties and shall also be deemed to set forth the entire agreement between
the parties in relation to the subject matter hereof. No terms or conditions endorsed upon, delivered with or contained in any documentation from you of whatsoever nature
will form part of the contract and you waive any right which you might otherwise have to rely on any such terms. Each Order to purchase Goods and/or Services from you
shall be deemed to be an offer by us to buy Goods and/or Services subject to these Conditions and no Order shall be accepted and binding upon us until you either expressly
accept such Order by giving us notice of acceptance; or impliedly accept by commencing work as required pursuant to the Order.
"Goods" means any goods or services to be provided under this Order.
"Guarantee Period" means the period stated in the offer or quotation commencing when the Goods have been despatched.
"Order" means our purchase order in respect of any Goods or any part of them.
"We" "our", "ourselves" and "us" means Aerotron Limited.
"You" "your" and "yourself" means any person or corporate entity which commences work pursuant to a
All Goods and Services requested by us must be ordered by us via an official Aerotron Order (Purchase, Repair, Local Purchase Order). If you have not received an official Aerotron Order then you proceed at your own risk.
We accept no liability for any Goods delivered unless the Order has been placed by one of our duly authorised representatives.
We reserve the right to cancel any order within 72 hours with no penalty what so ever, unless otherwise strictly agreed to in writing in our official Aerotron Order.
(i) The Goods shall be serviceable or repairable, of the best available design, of the best quality, material and workmanship, be free from defects and conform in all respects with the
Order and comply with all laws, codes of practice, industry standard or other industry norms laid down on a self-regulatory basis and comply with all other warranties implied
or provided for by
(ii) If within the Guarantee Period any defect in the provision of Goods shall be discovered or arise under normal use attributable to faulty design, materials or workmanship,
you shall promptly remedy the defect either by replacement or repair of the Goods at our option at your own expense and to our reasonable satisfaction. You shall not reject
any claim made in respect of any defect arising within the Guarantee Period on the basis that we failed to make the complaint during such period.
(iii) The provisions of this Clause shall apply to Goods so replaced or repaired and shall be effective from the date of such replacement or repair.
(iv) Notwithstanding the above, the replacement or repair of Goods in the
Guarantee Period shall not prejudice any of our rights against you resulting from such defects, faulty
design, materials or workmanship in the Goods.
5. Inspection and Testing
Prior to delivery of any Goods to be provided under the Order you shall inspect the Goods for compliance with the Order and in assessing their fitness for use we
shall be deemed to rely on your skill and judgement. You shall, if requested by us, supply certified copies of records of such inspection free of charge. You will grant
to us or our nominated representatives (including, but not limited to, the Purchaser Representative named in the Order but also our customer or regulatory authorities) a right of access at all reasonable times to all the applicable areas of all facilities, at any level of the supply chain, involved in the order for the purpose of checking progress and carrying out or witnessing tests and/or inspection procedures. Such tests and inspection as we may carry out shall not in any way diminish, affect or impair your obligations.
(i) We must be notified in writing of any nonconforming processes, products, services, or any changes in product and/or process, change of suppliers, changes in manufacturing and you must obtain approval for their disposition.
shall take any further action we may require to ensure your obligations under the Order are met.
You will package the Goods in a manner suitable for transit and/or storage at no cost to us unless otherwise specified in the Order. All packaging must comply with ATASpec 300.
7. Deterioration of Goods.
If the Goods are perishable or have a life expectancy of a fixed duration or if there are any circumstances known to you which would adversely affect the life-span of the
Goods, you will forthwith advise us in writing of all such necessary and appropriate information relating thereto which shall form part of the description of the Goods and you
shall take any further action we may require to ensure your obligations under the Order are met.
(i) Time for the delivery of the Goods under the Order shall be of the essence.
(ii) Unless otherwise specified by us, delivery of the Goods shall be effected by you at your own risk and expense at the place and on the date(s) specified in the Order.
(iii) In the event of the Goods not being made available on the date(s) specified in the Order, we retain the right to cancel the Order pursuant to Condition 12.
(iv) The Goods shall be delivered in the quantities stated in the Order or in such other quantities are agreed by us in writing. If you deliver less than the agreed quantity of
Goods we may reject the whole or any part of the Goods and rescind the contract. If you deliver more than the agreed quantity of Goods, we may either a) accept all of the
Goods without liability for additional payment; or b) reject the Goods which exceed the agreed quantity (which Goods shall be at your risk and collected by you within 5 days of
(i) The price for the Goods shall be the price stated in the Order. Unless otherwise agreed, payment
for Goods provided pursuant to an Order shall be made within 30 days of the later of a) receipt by us of the invoice together with such reasonable supporting information as
may be required by us to support each respective invoice; and b) delivery of the Goods.
(ii) Notwithstanding the above, if there is a disagreement in respect of the amount shown on an invoice, that portion of the invoice may be deleted by us from the respective
payment until resolution, but in no case shall the entire payment be deleted by us owing to a question regarding a lesser portion.
(iii)Time for payment shall not be of the essence
(iv) We may set off any amount owing at any time from you to us against any amount payable by us to you under a contract.
10. Passing of Title and Risk
(i) Title in the Goods shall pass on us upon the earlier of payment of the price for the Goods or on acceptance of the Goods. The Goods shall remain at your risk until delivery
to us (including off-loading and stacking) is complete or (in the case of delivery by installments) on the delivery of each installment.
(ii) Where the Goods or any part of them, though ready for delivery, are retained by you pending delivery instructions then the property in such Goods shall pass to us upon
payment, but the risk in such Goods shall remain with you until actual delivery.
11. Insurance and Indemnity
(i) You will hold and maintain in force insurance to cover:
(a) the full value of any goods, tools, materials, or other property provided by or through us to you in connection with the Order (including for the avoidance of doubt, the
Goods) whilst they are in your possession and/or control; and
(b) your indemnity obligations as specified below.
(ii) You will indemnify us against any and all liability, loss, damages, claims, costs and expenses (including legal expenses on a full indemnity basis)
howsoever arising in connection with the following:
(a) your failure to provide the Goods in accordance with the Order and these Conditions;
(b) injury to any person or damage to any property arising from the provision of the Goods;
(c) any breach by you of any statutory duty;
(d) if you or any of your servants or agents cause or suffer any injury or damage whilst on our premises in
performance of this Order
(e) any and all liability, loss, damages, claims, costs and expenses arising out of any claim in respect of any infringement or alleged infringement of any Intellectual Property
Rights anywhere in the World resulting from the design, manufacture, use, supply or re-supply of the Goods under this Order; and
(f) If you fail to comply with any statute, statutory rule, order, directive or regulation under Condition 13
12. Rejection and Rescission
If the Goods do not comply with the Order or any of the Conditions of the Order are broken or not complied with by you or it is clear that you will be unable to perform your part
of the Order, we shall at our discretion (and without prejudice to our other rights and remedies) be entitled to reject the Goods and/or rescind the Order (notwithstanding that
the property in the Goods may have passed) by giving written notice to you and the following provisions shall where appropriate apply:-
(i) We shall return to you at your risk and expense any rejected Goods or any Goods delivered which by reason of non-delivery of the balance are not reasonably capable of
use by us, or at our option shall require you to collect the same.
(ii) We may, at our discretion, require you either to restore or rectify the Goods to our satisfaction or to replace any Goods so rejected at your expense, within a time frame
specified by us and upon the same conditions as herein stated.
(iii) You will promptly repay to us any money paid by us in respect of rejected or undelivered Goods.
13. Statutory and other requirements
(i) It is a condition of this Order that the provision of Goods under this Order comply and will continue to comply, with the provisions and requirements applicable to the
design, manufacture, supply and use of the Goods hereunder (whether expressly or by implication) of any statute, statutory rule, order, directive or regulation in force at the
time of delivery.
(ii) The Goods and all supporting literature shall conform with all
descriptions (within the meaning of the Trade Descriptions Acts 1968 and 1972 or any statutory modification or re-enactment thereof) applied thereto by you.
(iii) You will supply where appropriate, the identification and revision status of specifications, drawings, process requirements, inspection/verification instructions and other relevant technical data.
(iv) You will prevent the use of suspected unapproved and counterfeit parts.
(v) You will agree to ensure that applicable persons are aware of;
- Their contribution to product or service conformity;
- Their contribution to product safety;
- Their importance of ethical behaviour;
(vi) You will implement a quality management system which covers;
- The use of customer designated or approved external providers, including process sources
- You will retain documented information, including retention periods and disposition requirements.
(vii) You will flow down to external providers applicable requirements including Aerotron requirements, where applicable.
14. Confidentiality, Intellectual Property and Data Protection
(i) You will not use our name or other identity for advertising or publicity purposes without our prior written consent.
(ii) If you access any personal data in the course of providing the Goods, you shall process such personal data on behalf of us as data processor (as such terms are defined
in the Data Protection Act 1998). You warrant, represent and undertake that you shall process such personal data in accordance with our instructions from time to time and
establish and maintain appropriate technical and organisational measures against unauthorised or unlawful processing of personal data and against accidental loss,
destruction of, or damage to such personal data.
15. Force Majeure
(i) We shall not be liable to you for failure to accept delivery of the Goods or provision of services resulting from any circumstances beyond our control including, but without
limitation, breakdown of plant or apparatus, fire, explosion, accident, strike or other labour disputes, lock-out, governmental actions, war or national emergency, acts of
terrorism, protests, riot or other civil commotion (an "Event of Force Majeure") affecting our business, and we reserve the right to defer the date of delivery and/or payment or
to cancel the contract or reduce the volume of the Goods ordered pursuant to the Order in case of an Event of Force Majeure affecting our business.
(ii) If you fail to perform any part of this Order by reason of any Event or Force Majeure affecting your business or that of your suppliers or another third party we may at our
discretion suspend or cancel the delivery of the Goods under this Order without any liability to you for payment.
16. Assignment and Sub-contracting
In the event the Order is sub-contracted it will be your responsibility to ensure all the conditions are met and adhered to as well as any specific customer requirements contained in the Order by any other third party or organization in the supply chain.
If any Condition is held by a court or tribunal of competent jurisdiction to be unlawful or unenforceable that part shall be struck out and the remainder shall remain in full effect.
We shall have the right at any time and for any reason without prejudice to our other rights and remedies to terminate the Order in whole or part upon written notice to you immediately if:
(i) you commit a material breach of any of the terms and condition of the Order (including for the avoidance of doubt, these Conditions and any other terms and conditions to
be agreed between us in writing or
(ii) any distress, execution or other process is levied upon any of your assets or
(iii) if you have a bankruptcy order made against you, or you make an arrangement or composition with your creditors or if you otherwise utilise the benefit of any statutory
provision for the time being in force for the relief of insolvent debtors or if you (as a body corporate) convene a meeting of your creditors or if you enter into liquidation or if you
have any receiver, manager, administrator or administrative receiver appointed over you or any part of your undertaking or if notice of intention to appoint an administrator is
given by you or your directors or by a qualifying floating charge holder (as defined by section B1 of the Insolvency Act 1986)or if a resolution is passed or a petition presented
to any court for your winding up or granting an administrative order in respect of you or if any proceeding are commenced relation to your insolvency or possible insolvency or
(iv) if you cease or threaten to cease to carry on business or
(v) if your financial position deteriorates to such an extent that in our opinion your capability to adequately fulfil your obligations pursuant to the Order has been placed in
No omission or delay by us in exercising any of our rights will be treated as a waiver thereof, nor will any single or partial exercise of a right preclude any other or future
exercise thereof or any exercise of any other right and a waiver of a right on one occasion will not constitute a waiver of such right in the future.
No variation or amendments to this Agreement shall be binding on us unless made in writing and signed by one of our authorised representatives (including but not limited to the Purchaser Representative named in the Order)
21. Law and Jurisdiction
The Order shall be construed and have effect in all respects in accordance with English Law and you agree to irrevocably submit to the exclusive jurisdiction of the English
courts. Where any special conditions of purchase applicable to this order are in conflict with these general terms and conditions, the special conditions in the Order shall
22. Regulatory/Certification Approval
You shall obtain all EASA/CAA and FAA certificates or approvals that may be required and comply with all such applicable regulatory requirements contained therein to
appropriately provide the Goods. All Goods will be required with a valid certificate of conformity, test reports and/or airworthiness certificate. In the event you do not comply with the applicable regulatory requirements, we shall be entitled to terminate the Order by written notice to
you but without prejudice to any other right or action which we may have at the date of such notice in the event you do not hold the applicable approvals
23. Export Control Regulatory
It is the policy of Aerotron Limited, its subsidiaries and affiliates to verify the end use and end user in all product sales to ensure compliance with applicable export control laws and regulations of the United Kingdom, The European Union and the United States of America. Any sales, leases or transfer control of any products, including but not limited to technology or software, purchased and / or leased from Aerotron Limited to any persons or entities in Cuba, Iran, Libya, North Korea, Sudan, Syria, or Crimea, or to any other sanctioned country, will not be permitted by Aerotron Limited under any circumstances unless authorised under United Kingdom, United States of America and European Union regulations. Any customer placing an order with Aerotron Limited agrees that it will abide by all applicable U.K., U.S and EU export control laws and regulations for any products purchased from Aerotron Limited that require any licenses or prior approvals from the U.S. government, the E.U,, or the U.K. government prior to export or re-export of products, software or technology.